Laboratory Chemical

Product Details:

Dimethyl Sulfate is an odorless, corrosive, oily liquid with an onion-like odor that emits toxic fumes upon heating. Dimethyl sulfate is used in industry as a methylating agent in the manufacture of many organic chemicals. Inhalation exposure to its vapors is highly irritating to the eyes and lungs and may cause damage to the liver, kidney, heart and central nervous system, while dermal contact causes severe blistering. It is a possible mutagen and is reasonably anticipated to be a human carcinogen based on evidence of carcinogenicity in experimental animals. (NCI05)

Dimethyl sulfate is a colorless oily liquid, odorless to a faint onion-like odor. It is very toxic by inhalation. It is a combustible liquid and has a flash point of 182°F. It is slightly soluble in water and decomposed by water to give sulfuric acid with evolution of heat. It is corrosive to metals and tissue. It is a potent methylating agent.

Product Details:

Naphthalene is a white, volatile, solid polycyclic hydrocarbon with a strong mothball odor. Naphthalene is obtained from either coal tar or petroleum distillation and is primarily used to manufacture phthalic anhydride, but is also used in moth repellents. Exposure to naphthalene is associated with hemolytic anemia, damage to the liver and neurological system, cataracts and retinal hemorrhage. Naphthalene is reasonably anticipated to be a human carcinogen and may be associated with an increased risk of developing laryngeal and colorectal cancer. (NCI05)

NAPHTHALENE is a white crystalline volatile solid with a strong coal-tar odor. The solid is denser than water and insoluble in water. Burns, but may be difficult to ignite. . In the molten form it is very hot. Exposure to skin must be avoided. Also the vapors given off by the material may be toxic. Used as a moth repellent, fumigant, lubricants, and to make other chemicals, and for many other uses

Product Details:

Pinene is an organic compound of the terpene class, one of two isomers of pinene. It is an alkene and it contains a reactive four-membered ring. It is found in the oils of many species of many coniferous trees, notably the pine. It is also found in the essential oil of rosemary (Rosmarinus officinalis). Both enantiomers are known in nature; 1S, 5S- or (& #8722; )-& #945; -pinene is more common in European pines, whereas the 1R, 5R- or (+)-& #945; -isomer is more common in North America. The racemic mixture is present in some oils such as eucalyptus oil. The four-membered ring in & #945; -pinene 1 makes it a reactive hydrocarbon, prone to skeletal rearrangements such as the Wagner-Meerwein rearrangement. For example, attempts to perform hydration or hydrogen halide addition with the alkene functionality typically lead to rearranged products. of under acidic conditions. With concentrated sulfuric acid and ethanol the major products are terpineol 2 and its ethyl ether 3, while glacial acetic acid gives the corresponding acetate ester 4. With dilute acids, terpin hydrate 5 becomes the major product. With one molar equivalent of anhydrous HCl, the simple addition product 6a can be formed at low temperature in the presence of ether, but it is very unstable.

Product Details:

Lecithins are naturally occurring phospholipid components critical for the normal structure and function of all animal and plant tissues.

While lecithins are important biologically, isolated lecithins exist in different forms and can play a role in several commercial applications such as food, pharmaceutical, paint, plastics and other industrial products due to their unique physical properties. Due to its lipophilic and hydrophilic properties, lecithin is used in food applications for functional properties, primarily as an emulsifier, but it is also consumed as supplements.

Product Details:

is found in soy bean. Emulsifier, stabiliser Approximately one of the three arabinosyl chains attached to the galactan chain contains succinyl groups. Although one succinyl group is most common, up to three succinyl groups per released arabinan fragment can be found on oligo-arabinans. However, arabinan fragments substituted with GalNH2 are not succinylated. Importantly, in the case of M. tuberculosis, and most likely in all slow growers, both positive charge (protonated GalNH2 as GalNH3+) and negative charge (succinyl) are present in the middle regions of the arabinan, specifically at O-2 of the inner 3, 5- -D-Araf units.

Product Details:

ISOPROPYL ACETATE is a clear colorless liquid. Flash point 40°F. Vapors are heavier than air. Contact with the material may irritate skin, eyes or mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used as a solvent.

Isopropyl acetate is found in alcoholic beverages. Isopropyl acetate is isolated from ripening melons, apples, bananas, blackcurrants, other fruits and grape oil. Also present in cheddar cheese, soybean, beer, red wine, white wine and plum brandy. Isopropyl acetate is a flavouring ingredient Isopropyl acetate is a solvent with a wide variety of manufacturing uses that is miscible with most other organic solvents, and moderately soluble in water. It is used as a solvent for cellulose, plastics, oil and fats. It is a component of some printing inks and perfumes. Isopropyl acetate is an ester, an organic compound which is the product of condensation of acetic acid and isopropanol. It is a clear, colorless liquid with a characteristic fruity odor

Product Details:

METHACRYLIC ACID is a clear colorless liquid (or low-melting solid) with a pungent odor. Corrosive to metals and tissue. Flash point 170 degreeF. Melting point 61degreeF. May polymerize exothermically if heated or contaminated. If the polymerization takes place inside a container, the container may rupture violently. Less dense than water. Vapors heavier than air. Used to make plastics.

Methacrylic acid is an alpha,beta-unsaturated monocarboxylic acid that is acrylic acid in which the hydrogen at position 2 is substituted by a methyl group. It derives from an acrylic acid. It is a conjugate acid of a methacrylate.

Product Details:

PHYSICAL DESCRIPTION: Colorless to white monoclinic crystals or prisms or white powder. Sublimes when gently heatedMelamine is an organic base and a trimer of cyanamide, with a 1, 3, 5-triazine skeleton. Like cyanamide, it contains 66% nitrogen by mass and, if mixed with resins, has fire retardant properties due to its release of nitrogen gas when burned or charred, and has several other industrial uses. Melamine is also a metabolite of cyromazine, a pesticide. It is formed in the body of mammals who have ingested cyromazine. It has been reported that cyromazine can also be converted to melamine in plants. Melamine is combined with formaldehyde to produce melamine resin, a very durable thermosetting plastic used in Formica, and melamine foam, a polymeric cleaning product. The end products include countertops, dry erase boards, fabrics, glues, housewares, dinnerware, cooking spoons, guitar saddles, guitar nuts, acoustic foam paneling, and flame retardants.

Product Details:

As a prominent manufacturer and supplier, we are indulged in offering Mix Xylene. This colorless xylene is known in the market for its sweet smell, non-toxicity and high flammability. We offer products that are quality tested by our experts to ensure excellent chemical properties. According to the demands of our esteemed clients, our range is made available in safe packing to prevent from any leakage. Mix Xylene is used as a solvent in the printing, rubber, leather and other allied industries.

Product Details:

Epichlorohydrin is a volatile and flammable, clear, colorless, liquid, chlorinated cyclic ether with an irritating, chloroform-like odor that emits toxic fumes of hydrochloric acid and other chlorinated compounds when heated to decomposition. Epichlorohydrin is used in the manufacture of epoxy resins, synthetic glycerin and elastomers. Exposure to epichlorohydrin irritates the eyes, skin and respiratory tract, and can cause chemical pneumonitis, pulmonary edema, and renal lesions. This substance also affects the blood. Epichlorohydrin is reasonably anticipated to be a human carcinogen and may be associated with an increased risk of developing respiratory cancer. (NCI05)

1-CHLORO-2,3-EPOXYPROPANE is a clear colorless liquid with an irritating chloroform-like odor. Density 9.8 lb / gal. Flash point 87°F. Polymerizable. If polymerization takes place inside a closed container, the container is subject to violent rupture. Irritates the skin and respiratory system. Toxic by ingestion. A confirmed carcinogen. Vapors heavier than air. Used to make plastics and as a solvent.

Product Details:

A colorless liquid made by oxidation of aliphatic hydrocarbons that is used as a solvent and chemical intermediate.

N-PROPANOL is a clear colorless liquid with a sharp musty odor like rubbing alcohol. Flash point 53-77F. Autoignites at 700F. Vapors are heavier than air and mildly irritate the eyes, nose, and throat. Density approximately 6.5 lb / gal. Used in making cosmetics, skin and hair preparations, pharmaceuticals, perfumes, lacquer formulations, dye solutions, antifreezes, rubbing alcohols, soaps, window cleaners, acetone and other chemicals and products.

Propan-1-ol is the parent member of the class of propan-1-ols that is propane in which a hydrogen of one of the methyl groups is replaced by a hydroxy group. It has a role as a protic solvent and a metabolite.

Get best price for Propanol, CAS No. 71-23-8, C3H8O of purity 95% in packaging size 50 litre drum

Product Details:

Cyclohexanone is a colorless to pale yellow liquid with a pleasant odor. Less dense than water . Flash point 111°F. Vapors heavier than air. Used to make nylon, as a chemical reaction medium, and as a solvent.

Cyclohexanone is a cyclic ketone that consists of cyclohexane bearing a single oxo substituent. It has a role as a human xenobiotic metabolite.

Get best price for Cyclohexanone, CAS No. 108-94-1, C6H10O, of purity 80-90% in packaging size 50 L Drum